Tag Archives: pi-cars

Pi-Cars appears in Raspberry Pi For Dummies!

Posted on May 5, 2013 by Barnaby Kent

Pi-Cars appears in the new book Raspberry Pi For Dummies by Sean McManus and Mike Cook, in a chapter at the end that outlines some inspiring Raspberry Pi projects. Co-author Sean McManus told us: “The book gets people up and … Continue reading →

Posted in Blog | Tagged , , , , , , , | Leave a comment

Pi-Cars Showroom

Posted on April 10, 2013 by Barnaby Kent

Welcome to the Pi-Cars showroom. We plan to showcase any radio controlled cars in here that have been converted to Pi-Cars and also some of the things they get up to. If you have created a Pi-Car with our Tool … Continue reading →

Posted in Uncategorized | Tagged , , , , | 1 Comment

Python while loops – Driving lesson #5

Posted on March 4, 2013 by Barnaby Kent

Pre-driving checks If you are here you should be able use an editor to write Python code to control  your Pi-Car and understand what we mean when we talk about constants, variables and print statements. If not by all means … Continue reading →

Posted in Uncategorized, Under the bonnet | Tagged , , , , | Leave a comment

Python if else statements – Driving Lesson #4

Posted on March 3, 2013 by Barnaby Kent

Pre-driving checks If you are here you should be able use an editor to write Python code to control  your Pi-Car and understand what we mean when we talk about constants, variables and print statements. If not by all means … Continue reading →

Posted in Uncategorized, Under the bonnet | Tagged , , , , | 2 Comments

Python variables and commenting – Driving Lesson #3

Posted on March 1, 2013 by Barnaby Kent

Pre-driving checks If you are here you should be able use an editor to write Python code to control  your Pi-Car. If not by all means have a go at this lesson but if you get stuck try Driving Lesson#1 … Continue reading →

Posted in Under the bonnet | Tagged , , , , , | 3 Comments

Example Pi-Cars Python Code

Posted on February 28, 2013 by Barnaby Kent

This code will be incorporated into the Driving Lessons in due course but in the meantime here is some Python code that will work with your Pi-Car. How to get the code onto your Raspberry Pi and run it To … Continue reading →

Posted in Under the bonnet | Tagged , , , , | 2 Comments

Introduction to Python, constants and print statements – Driving Lesson #2

Posted on February 15, 2013 by Barnaby Kent

Pre-driving checks If you are here you should have set up your Raspberry Pi,  understand how to connect your Pi-Car to your Raspberry Pi and know how to use IDLE or another editor to write Python code and run it. … Continue reading →

Posted in Under the bonnet | Tagged , , , , , , , | 3 Comments

Pi-Cars and Python – Driving Lesson #1

Posted on January 10, 2013 by Barnaby Kent

Pre-driving checks If you are here you should have set up your Raspberry Pi and also understand how to connect your Pi-Car to your Raspberry Pi. If not don’t worry: For more information on setting up your Raspberry Pi click here. … Continue reading →

Posted in Under the bonnet | Tagged , , , , | 4 Comments

Jump start – get your Pi-Car going with the Pi Store and Scratch

Posted on January 3, 2013 by Barnaby Kent

Set-up This Jump start assumes that you have a Raspberry Pi up and running and you are able to able to access the screen with the big Raspberry Pi showing on it and importantly it also has the Pi Store … Continue reading →

Posted in Blog, Under the bonnet | Tagged , , , | 5 Comments

Pi-Cars and Scratch – Driving Lesson #1

Posted on December 23, 2012 by Barnaby Kent

Pre-driving checks If you are here you should have set up your Raspberry Pi and also understand how to connect your Pi-Car to your Raspberry Pi. If not don’t worry: For more information on setting up your Raspberry Pi click … Continue reading →

Posted in Under the bonnet | Tagged , , , , | Leave a comment